FAQ

technical problem

The red emergency stop switch of the machine is pressed, find the emergency stop switch and rotate it clockwise to pop out.
Unless the customer has special requirements, under normal circumstances, we will leave the factory after grease for the parts that are needed when leaving the factory. In addition, we use maintenance-free bearings for the rotating bearing, so customers can use it with confidence.
For all the equipment sold by our company, all the visual inspections are required before they leave the factory, and the functional test (no-load test run) will provide samples for customers, which will be tested and confirmed according to customer requirements.
Main categories of toroidal coil winding machines:
        1 side slip toroidal coil winding machine-generally used in the winding of transformer coils, especially the wire of the transformer coil is relatively thin but the number of turns is relatively large.
        2.The belt-type toroidal coil winding machine is generally used for the winding of toroidal inductors. The number of turns is not much, but the wire diameter is relatively thick and the inner diameter is small, and the material is mostly ferrite.
        3.Gear-type toroidal coil winding machine, generally used for toroidal transformer coil winding, the wire diameter is thicker but the coil volume is larger, the material is mainly iron core, and the inner diameter is larger.
As the name suggests, this model is developed based on the production process of high-frequency transformers. The features are as follows: a variety of windings of different wire diameters can be processed in one clamping, the machine comes with an insulating tape holder, and the machine comes with a wall tape holder. Disadvantages: because of For structural reasons, the tension of the winding is only adjusted by the tightness of the wool felt, and the feeder hole is only a plastic row hole, because the high-frequency transformer has no requirement for the arrangement accuracy, so the machine cost is low and the price is low.
1000 sets of processing data can be saved, and you can switch between 1000 sets of process data, save and recall.
The working principle of the toroidal coil is probably the first step is to wind the enameled wire on a wire storage steel ring, and the second step is to wind the wire on the wire storage steel ring to the product.

See the video link for details: How to use toroidal coil winding machine.
                                                   Controller description of toroidal coil winding machine
                                                     
The general coil winding machine usually refers to a winding machine that winds a coil with a circular or rectangular cross section. The winding mechanism is configured to reciprocate during the winding process. This concept has nothing to do with accuracy, that is, the general coil winding machine has accuracy. The higher the accuracy, and the lower accuracy.
          The ordinary precision winding machine itself is a product that has been optimized for a large number of targeted prices. The quality requirements are not high, but the cost of coils with larger batches has been repeatedly compressed, so whether it is control, mechanism, and cost will be relatively low. The focus of the winding machine is to achieve high-precision coil winding.

          The high precision of the coil usually refers to the neat arrangement, which is the highest goal of the winding machine technology.The neatly arranged coil not only improves the appearance, but also reduces the volume, increases the energy density, and increases the inter-turn withstand voltage, and the consistency is guaranteed.
           The winding direction is set incorrectly. For example, the starting point is 3, the width is set to 5, but the winding direction is set from right to left, and the winding mechanism moves more than 0 points from left to right, this   signal is issued.

Approach:

          Press "Step Setting" and press "Enter" and press "Line Direction" and press "Enter" and press "Reset".
Press "Steps to set", "Enter"
Then keep pressing "Enter"
Until the cursor jumps to "High Speed" (the speed during normal winding)
Then edit the corresponding value (percentage)
Then connect "input"
Jump to "low speed" (start and end speed)
Then edit the corresponding value (percentage)
Then press "Enter"
"Rest"
OK.