Toroidal coil winding machine

heading_title

There are many types of toroidal coil winding machines


There are side-slip toroidal coil winding machines with processing coils, and belt-type toroidal coil winding machines with small-sized inductors.

Toroidal coil winding machines have the same specifications.Generally speaking, the smaller the inner diameter, the more difficult to process, and the thicker the wire diameter, the more difficult to process.

The video above shows the winding of an enameled wire with a diameter of 14mm and a diameter of 1.3mm.

Related Post

Application of toroidal coil winding machine in craft products

Application of toroidal coil winding machine in craft products

Application of toroidal coil winding machine in craft products


General debugging method of winding machine

General debugging method of winding machine

General debugging method of winding machine

      Some people look at the winding machine and feel a bit like a lathe, but in fact the winding machine has to wind a neat coil. Compared with the smoothness of the lathe, it is much more complicated, so we will find that the lathe has a long time ago The national standard has quantitative standards for its various indicators, but the winding quality of the winding machine has many condensing factors and it is difficult to quantify.

        

     It is precisely because of the above reasons that at first I feel that the winding machine should be very easy to debug, but after the facts, I will be a little frustrated. Although the winding machine debugging is indeed more complicated than imagined, but if we master the basic laws After that, it's not difficult to practice more.

    First of all, we must have a preliminary understanding of the structure of the winding machine, otherwise, we are not familiar with the structure of the winding machine, and there is no professional technical personnel training. Automatic debugging of the winding machine will be incompetent.

Gear type ring coil wrapping tape machine

Gear type ring coil wrapping tape machine

Gear type ring coil wrapping tape machine

Compared with the belt-type loop coil tape belt machine, the gear-type loop coil tape belt machine has a larger processing range and more storage capacity. Our company's gear-type loop coil belt tape machine can be coated with polyester film and polymer Imide, cloth tape, glass fiber tape, etc.

We now open the clamping seat of the gear-type ring coil tape belt machine, the storage ring opens, and then put the product on, the storage ring buckles, the clamping seat merges, and then pay attention to the insulating tape must pass through the middle of the scissors, etc. Cut it off with scissors at once, and then go in from any bearing above the storage ring from the outside to fix the tape head behind the storage ring. The first few laps are slow because they are in storage. Ok, the product is finished, now we take it off, and then close the storage ring, the clamping seat is restored.

Toroidal coil winding machine operation video-Machine operation

Toroidal coil winding machine operation video-Machine operation

       Below we introduce the structure of this toroidal coil winding machine. This part is the controller and this part is the clamping base. We control the product clamping by opening and closing the handle. This position is the storage ring. The enameled wire is stored on the storage ring first, and then wound around this product. This position is a manual winding handle. Turn this handle. The steel plate can be driven manually. The steel ring has an opening. This position is an opening. The opening is opened and closed by sliding the handle up and sliding to the left. . This position is called the crimping plate, and this position is called the baffle. After the line is removed, its degree of tightness is determined by the tension of the belt. The tension of the belt is adjusted by the tension adjustment knob. When adjusting the tension of the belt, first loosen this And then rotate the handle. When rotating the handle, there is an idler wheel. When the idler wheel goes in, the tension of the belt will increase, so that the winding of the enameled wire will become tighter.